Ashcroft Gauge Pressure Sensor – T-ASH-G2-x00

Ashcroft Gauge Pressure Sensor memberikan pengukuran tekanan yang presisi dalam sistem udara, air, atau gas dan cairan lain yang kompatibel, dengan akurasi ± 1% FS dari -20 ° hingga 85 ° C (-4 ° hingga 185 ° F) dan hanya ± 1,5% FS -40 ° hingga -20 ° C dan 85 ° hingga 125 ° C (-40 ° hingga –4 ° F dan 185 ° hingga 257 ° F).

Persyaratan untuk digunakan dengan pencatat data tertentu:

Seri HOBO MX1100: kabel input DC 0-5 Volt (SD-VOLT-05) dan daya eksternal yang disediakan oleh adaptor AC (AC-SENS-1)

Seri HOBO U12, UX120-006M atau ZW: kabel input DC 0-5 Volt (CABLE-ADAP5) dan daya eksternal yang disediakan oleh adaptor AC (AC-SENS-1)

HOBO RX3000: modul input analog (RXMOD-A1)

HOBO U30: modul input analog (VIA)

HOBO H22: modul input analog (S-FS-CVIA)

 

Fitur

• Transduser tekanan berkinerja tinggi untuk digunakan di tempat industri.
• Sambungan berbahan stainless-steel 1/4 “NPT.
• Tersedia dalam 3 range: 100, 200 & 500 psig

 

Spesifikasi

Measurement ranges: 100, 200, 500 psig

Compensated temp range: -40° to 125°C (-40° to 257°F)

Accuracy:

±1% FS from -20° to 85°C (-4° to 185°F)

±1.5% FS -40° to -20°C and 85° to 125°C (-40° to –4°F and 185° to 257°F)

Non-linearity: less than ±0.1% of span typical

Non-repeatability: less than ±0.03% of span typical

Hysteresis: less than ±0.01 of span typical

Stability: less than ±0.25% of span/year

Durability: tested to 50 million cycles

Overpressure: 200% FS

Response time: less than 1 msec

Power: 9-36 VDC, 5mA

Operating temp range: -40° to 125°C (-40° to 257°F)

Operating humidity range: 0 to 100% RH, no effect

Output signal to FlexSmart module: 0-5 VDC, 3 wire

Insulation breakdown voltage: 100 VAC

Insulation resistance: greater than 100 megohms at 100 VDC

Construction: Shielded cable, 24 AWG, PVC jacket, 1-meter

Pressure connection: 1/4” NPT 304 stainless steel

Sensor material: 17-4PH stainless steel

Housing material: 20% glass reinforced nylon, fire retardant to UL94 V1

CE compliance: Per EN 61326: 1997 + A1: 1998 + A2: 2001, Annex A (Heavy Industrial)

Dimensions: 2.9 cm diameter x 6.4 cm long (1.15 in. diameter x 2.5 in. long)

Outer cable diameter dimension: 0.21 in. (5.4-mm)

Weight: 89.4g (3.15oz)

Number of data channels: 1