Deskripsi
Wind Sensor Set mencakup Sensor Kecepatan Angin Smart Plug-and-play On-grade dan Sensor Arah Angin. Kombinasi ini menyajikan data kecepatan angin rata-rata, hembusan angin 3 detik tertinggi, dan arah angin rata-rata untuk interval pengukuran. Sensor ini akan memberikan kinerja bertahun-tahun yang akurat dan dapat diandalkan.
CATATAN: Pasang data logger ini pada M-CAA Full Cross Arm untuk jarak sensor yang tepat untuk pengukuran angin yang akurat di semua arah angin.
Lengan silang harus dipasang pada tiang yang stabil, menggunakan kabel pria sesuai kebutuhan untuk mencegah sensor bergetar dalam angin kencang.
Fitur
- Wind Sensor Set berisi plug-and-play Wind Speed Smart Sensor tingkat riset dan Wind Direction Smart Sensor
- Menyajikan data kecepatan angin rata-rata, hembusan angin 3 detik tertinggi, dan arah angin rata-rata untuk interval pengukuran
- Sensor tahan lama
Spesifikasi
| Specifications | Wind Speed/Gust (S-WSB-M003) | Wind Direction (S-WDA-M003) |
|---|---|---|
| Measurement Range | 0 to 76 m/s (0 to 170 mph) | 0 to 355 degrees, 5 degree dead band |
| Maximum Wind Speed Survival | 76 m/sec (170 mph) | 67 m/sec (150 mph) |
| Accuracy | ± 1.1 m/s (2.4 mph) or ± 4% of reading whichever is greater |
± 5 degrees |
| Resolution | 0.5 m/s (1.1 mph) | 1.4 degrees |
| Starting Threshold | 1.0 m/s (2.2 mph) | 1.0 m/s (2.2 mph) |
| Measurement Definition | Cup revolutions are accumulated every three seconds for the duration of the logging interval. Wind speed is the average speed for the entire logging interval. Gust speed is the highest three-second wind recorded during the logging interval. | Unit vector components of wind direction are accumulated every three seconds for duration of logging interval. Average direction is calculated from the average of these. |
| Operating Temperature Range | -40°C to +75°C (-40°F to +167°F) | -40°C to +70°C (-40°F to +158°F) |
| Environmental Rating | Weatherproof | Weatherproof |
| Service Life | Greater than 5 years typical | 4 to 6 years typical depending upon environmental conditions |
| Housing | Three cup polycarbonate anemometer: Modified Teflon® bearings and hardened beryllium shaft with ice shedding design | Injection-molded housing and vane, static dissipating base, lead-free silicon bronze nose, and aluminum mounting rod. |
| Bearing Type | Modified Teflon® bearings | two shielded stainless steel ball bearings |
| Turning Radius | 9.5 cm (3.75 in.) | Approximately 13.5 cm (5.25 in.) |
| Dimensions | 41 x 16 cm (16 x 6.5 in.) including 1.27 cm (0.5 in) diameter mounting rod; 5.5 cm (2.1 in.) drip overhang | 46 x 20 cm (18 x 8.5 in) including 1.27 cm (0.5 in) diameter mounting rod, 2.5 mm (0.1 in) drip overhang |
| Weight | Approximately 700 g (1.5 lbs) | Approximately 370 g (13 oz) |
| Number of Data Channels | 2 | 1 |
| Measurement Averaging Option | No | Automatic averaging (see Measurement Definition) |
| Cable Length Available | 3.5 m (11.5 ft) | 3.5 m (11.5 ft) |
| Length of Smart Sensor Network Cable | 0.5 m (1.6 ft) | 0.5 m (1.6 ft) |
| CE | The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) | The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
| Part Number | S-WSB-M003 | S-WDA-M003 |
Ulasan
Belum ada ulasan.