Wind Speed Smart Sensor - S-WSB-M003

Wind Speed Smart Sensor - S-WSB-M003



Ukur kecepatan angin dari 0 sampai 76 m / s (0 sampai 170 mph). Sensor pintar ini memberikan data rata-rata pelaporan angin dan kecepatan tertinggi 3 detik untuk setiap interval logging. Ambang batas awal adalah 1 m / s (2,2 mph); Sensor bertahan hingga 170 mph. Model ini hadir dengan kabel 3m.

CATATAN: Lengan Palang M-CAA atau Lengan Palang M-CAB diperlukan untuk pemasangan.

Di lingkungan apakah sensor ini beroperasi?
Sensor ini beroperasi di lingkungan indoor dan outdoor.

Pengukuran apa yang didukung sensor ini?
Sensor S-WSB-M003 mendukung pengukuran berikut: Angin


3 cangkir anemometer dengan bantalan TEFLON® dan poros berilium yang mengeras
Ukur kecepatan angin dari 0 sampai 76 m / s (0 sampai 170 mph)
170 mph survivabilitas


The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement parameters: average wind speed and highest 3 second gust in logging interval
Measurement range: 0 to 76 m/s (0 to 170 mph)
Operating temperature range: -40° to 75°C (-40° to 167°F)
Accuracy: ±1.1m/s (2.4 mph) or ±4% of reading whichever is greater
Resolution: 0.5 m/s (1.1 mph)
Starting threshold: 1 m/s (2.2 mph)
Maximum wind speed survival: 76 m/s (170 mph)
Distance constant: 3 meters
Housing: 3 cup anemometer with TEFLON® bearings and hardened beryllium shaft
Dimensions: 190 cm x 51 cm (7.5" x 3.2")
Approximate weight: 300 g (10 oz)
Cable length: 3 meter (10')
Length of Smart Sensor Network Cable: 0.5m
Service life: greater than 5 year life typical

Note: Cross arm recommended or pole mount (2 hose clamps required for pole mount)

The CE marking identifies this product as complying with all relevant directives in the European Union (EU). To minimize measurement errors due to ambient RF, use the shortest possible probe cable length and keep the probe cable as far as possible from other cables.