Description
The HOBO State/Pulse/Event/Runtime data logger merekam perubahaan kondisi, elektronik pulse, mekanikal dan elektrikal dari alat jarak jauh. Data logger ini sangat ideal untuk memantau pemakaian energi, peralatan mekanis, aliran air dan gas. HOBO UX90-001 State Data Logger tersedia dalam model memori 128 KB standar (UX90-001) yang mampu melakukan pengukuran sebanyak 84.650 dan juga versi memori 512KB yang diperluas (UX90-001M) mampu menghasilkan lebih dari 346.795 pengukuran.
Feature
- Satu logger dengan 4 mode perekaman.
- Saklar internal dapat digunakan untuk menentukan kapan pintu terbuka atau tertutup.
- Kompatibel dengan berbagai macam sensor eksternal.
- Ships dengan kabel input 2,5 mm.
- Kompatibel dengan software HOBOware dan HOBOware Pro untuk setup logger, grafik dan analisis.
Spesification
Produk ini berasal dari Amerika Serikat. Untuk melihat spesifikasi lengkap produk ini, jika tersedia lihat manual book yang terdapat pada tab dokumentasi.
Internal Sensor
Maximum state, event, runtime frequency: 1 Hz
Preferred switch state: No magnet present (normally open)
External Input
External contact input: Electronic solid state switch closure or logic driven voltage output
Range: 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)
Maximum pulse frequency: 50 Hz
Maximum state, event, runtime frequency: 1 Hz
Pulse, event lockout time: 0 to 1 second in 100 ms steps
Solid state switch closure: Input Low: < 10 K?; Input High: > 500 K?
Internal weak pull-up: 100 K?
Input impedance: Solid state switch closure: 100 K? pull up
Logger
Resolution: Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
Time accuracy: ±1 minute per month at 25°C (77°F) (see Plot A)
Battery life: 1 year, typical with logging intervals greater than 1 minute and normally open contacts
Memory
UX90-001: 128 KB (84,650 measurements, maximum)
UX90-001M: 512 KB (346,795 measurements, maximum)
Download type: USB 2.0 interface
Download time: 10 seconds for 128 KB; 30 seconds for 512 KB
Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification
LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)
Weight: 23 g (0.81 oz)
Environmental rating: IP50
- The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)