HOBO® U30 Shuttle - U-DT-2
HOBO® U30 Shuttle - U-DT-2

HOBO® U30 Shuttle - U-DT-2



Order

Description

HOBO U-DT-2 U30 Shuttle data Transporter menyediakan nyaman di-field data offload dan peluncuran kembali U30-NRC sistem HOBO dan Stasiun Cuaca HOBO (H21-001) dan Stasiun Micro (H21-002 saja), dan sistem HOBO Energi Logger (H22). display 2 x 16-karakter U30 Shuttle ini menampilkan pembacaan saat ini (untuk data logger yang dipilih), dan status logger.

CATATAN: HOBOware software Pro diperlukan.

Dalam apa lingkungan yang komunikasi ini beroperasi?

komunikasi ini beroperasi di lingkungan indoor dan outdoor.


Feature

  • Membacakan data dari sistem di lapangan untuk transfer ke komputer host
  • Opsional relaunches data logger - mensinkronisasikan jam logger dengan jam shuttle dan (dalam kebanyakan kasus) set penebangan dimulai pada interval berikutnya
  • Mempertahankan data dalam memori nonvolatile, bahkan jika baterai habis
  • Menampilkan status logger, termasuk memori, tingkat baterai, dan pembacaan sensor
  • Menampilkan status sendiri, termasuk jam, memori, dan tingkat baterai
  • Memungkinkan Anda mengubah baterai di lapangan tanpa ulang jam
  • Memungkinkan Anda untuk menguji sensor cerdas individual

Spesification

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Requirements:
USB cable (provided); compatible logger with appropriate cable and/or base station
U-DT-2: HOBOware 2.6 or greater

Compatibility: HOBO U30 series systems, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A

Logger-to-Shuttle Transfer Speed
USB: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds

Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware (see HOBOware User’s Guide for details) or changing logger batteries (10 minutes)

Ports: 
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time

Batteries
Main:
 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)

Battery Life
Main:
 One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)

Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).