12-bit Temperature/Relative Humidity (8m cable) Smart Sensor - S-THB-M008

12-bit Temperature/Relative Humidity (8m cable) Smart Sensor - S-THB-M008

Order Catalog


The 12-bit Temperature / Relative Humidity Smart Sensor dirancang untuk bekerja dengan semua pembawa data Onset yang menerima Smart Sensors. Semua parameter sensor disimpan di dalam Smart Sensor, yang secara otomatis mengkomunikasikan informasi data konfigurasi ke logger tanpa pemrograman, kalibrasi, atau pengaturan pengguna yang ekstensif.

Di lingkungan apakah sensor ini beroperasi?
Sensor ini beroperasi di lingkungan indoor dan outdoor.

Pengukuran apa yang didukung sensor ini?
Sensor S-THB-M008 mendukung pengukuran berikut: Kelembaban dan Suhu Relatif


  • Sensor Pintar
  • Bekerja dengan semua penebang kayu yang menerima masukan sensor cerdas
  • Secara otomatis mengkomunikasikan data konfigurasi ke logger


To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement Range
Temp: -40°C to 75°C (-40°F to 167°F)
RH: 0-100% RH at -40° to 75°C (-40° to 167°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%
Temp: +/- 0.21°C from 0° to 50°C (0.38°F from 32° to 122°F) 
RH: +/- 2.5% from 10% to 90% RH (typical), to a maximum of +/- 3.5% including hysteresis at 25°C (77°F); below 10% and above 90% ±5% typical
Temp: 0.02°C at 25°C (0.04°F at 77°F) 
RH: 0.1% RH

Bits Per Sample
Temp: 12
RH: 10

Temp: < 0.1°C (0.18°F) per year
RH: < 1% per year typical
Response Time
Temp: 5 minutes in air moving 1 m/sec
RH: 5 minutes in air moving 1 m/sec with protective cap
Operating temperature range: -40°C to 75°C (-40°F to 167°F)
Environmental rating weatherproof: 0 to 100% RH intermittent condensing environments. For best results, the Temp/RH Smart Sensor should be mounted inside a protective enclosure, such as a solar radiation shield.
Housing PVC cable jacket with ASA styrene polymer RH sensor cap: modified hydrophobic polyethersulfone membrane
Sensor dimensions: 10 x 35 mm (0.39 x 1.39 in)
Weight: 180 g (6.35 oz)
Number of data channels: 2
Measurement averaging option: No
Cable lengths available: 8 m (26.2 ft)
Length of Smart Sensor network cable: 6 m (19.6 ft)

This product meets CE specification EN61326 criterion C for ESD, criterion C for Radiated Immunity, criterion C for Fast Transient, criterion B for Conducted Immunity, criterion A for Power Frequency Magnetic Fields, and Radiated Emissions Group 1, Class B. To minimize measurement errors due to ambient RF, use the shortest possible probe cable length and keep the probe cable as far as possible from other cables.

Note: Sensor requires protection from rain or direct splashing; Radiation shield (RS3) strongly recommended for use in sunlight; sensors can be used in intermittent condensing environments up to 30°C and non-condensing above 30°C.