HOBO H22 Energy Data Logger – H22-001

Pantau energi dan peralatan industri dengan 15-channel data logger (Part # H22-001). Dengan banyak saluran, manajer energi dan fasilitas dapat dengan cepat dan mudah mendeteksi dan mengatasi berbagai masalah yang berkaitan dengan HVAC, mesin, dan sistem lainnya.

Terapkan produk ini dengan berbagai smart-sensor plug-and-play yang telah ditentukan sebelumnya untuk menciptakan sistem pemantauan yang kuat. Kompatibel dengan perangkat lunak HOBOware®, peneliti dapat melakukan analisis data yang efektif dalam beberapa menit.

Fitur

Pencatat data paling fleksibel di Onset merekam hingga 15 channel dari lebih dari selusin pengukuran

Menyediakan pot 12v untuk sensor pihak ketiga

Sensor cerdas yang telah dikonfigurasi

Modul pengkondisian sinyal mempertahankan konfigurasi sampai Anda mengubahnya, memberikan kenyamanan plug-and-play

Pilihan daya yang fleksibel : menggunakan baterai atau adaptor daya AC

Spesifikasi

Operating range:

-20° to 50°C (-4° to 122°F) with alkaline batteries

-40° to 60°C (-40° to 140°F) with lithium batteries

Sensor inputs: Three FlexSmart multi-channel modules and up to 6 Smart Sensors (which may have multiple parameters/channels)

Sensor connectors: Six RJ-12 Smart Sensor jacks plus 3 FlexSmart module slots

Communication: RS-232 via 3.5 mm serial port or/and 9-pin D-Sub connector

Dimensions: 15.6 cm x 8.4 cm x 4.6 cm (6.13″ x 3.31″ x 1.81″)

Weight: 435 g (15.23 oz) with batteries 238 g (8.33 oz) without batteries

Memory: 512K nonvolatile flash data storage

Memory modes: Stop when full; wrap when full

Operational indicators: Six indicators provide logging and sensor network status

Logging interval: One second to 18 hours, user-specified interval (2-second minimum for two-channel S-FS-TRMSA operation)

Sensor excitation: 12 V DC at 200 mA total, with user-programmable warmup time on a per-channel basis

Battery life: One year typical use (up to 75 mA excitation with 10-minute or longer logging Interval and 1-second warmup time)

Battery type: Eight standard AA alkaline batteries included (for operating conditions -20°C/-4°F to 50°C/122°F); optional AA lithium batteries available for operating conditions of -40° to 60°C (-40° to 140°F).

External power: Supports optional 13.6 V DC regulated AC Wall Adapter Connector. Internal batteries may remain installed. Alternatively, an automotive battery or 9-12 V DC regulated Wall Adapter may be used, but it is recommended to remove the internal batteries since they will discharge to the level of the external supply.

Time accuracy: 0 to 2 seconds for the first data point and ±5 seconds per week at 25°C (77°F)

Logging mode: Immediate, timed delay, or trigger (button-push) start options; supports sampling intervals for some sensors

Data communication: Current readings while logging; read out while logging; read out when stopped

This product meets CE specification EN61326 criterion C for ESD, criterion C for Radiated Immunity, criterion B for Fast Transient, criterion A for Conducted Immunity, and criterion A for Power Frequency Magnetic Fields. To minimize measurement errors due to ambient RF, use the shortest possible probe sensor cable length.