Deskripsi
Pemancar Tegangan AC adalah trafo bertenaga sendiri untuk memantau gelombang sinus dan tegangan AC fase tunggal. Tersedia dalam dua rentang pengukuran: 0 hingga 150 Volt AC, dan 0 hingga 300 Volt AC.
Requirements for use with specific data loggers:
- HOBO MX1100 series: a 4-20mA input cable (SD-MA-420)
- HOBO U12, UX120-006M, or ZW series: a 4-20mA input cable (CABLE-4-20mA)
Requirements
- For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
- For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)
Spesifikasi
| Ranges |
0-150 and 0-300 volts RMS |
| Sensor accuracy |
<±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range) |
| Over range |
+20% of span |
| Over load |
+40% of span |
| Frequency |
60 Hz AC |
| Supply |
Self-powered |
| Output |
0–20 mA |
| Response time to 90% |
<240 msec |
| Operating conditions |
-20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing |
| Housing |
Plastic polycarbonate |
| Protection Level Box |
According to IP-50 DIN 40050 Terminals: According to IP-10 DIN 40050 |
| Mounting |
Standard 35mm DIN rail |
Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.
Ulasan
Belum ada ulasan.