Plug Load Data Logger - HOBO - UX120-018

Plug Load Data Logger - HOBO - UX120-018



Order

Description

Onset's HOBO Plug Load Data Logger adalah data logger dengan akurasi tinggi dan mudah digunakan yang mengukur dan mencatat konsumsi daya dan energi dari beban plug 120V dari peralatan kantor, mesin penjual otomatis, dan perangkat lainnya.

Akurat dan kasar
Logger bersertifikasi UL memberikan akurasi pengukuran 0,5% dengan resolusi pengukuran 1 watt, menjadikannya pilihan ideal untuk membangun audit dimana data kebutuhan energi terperinci diperlukan. Perumahan yang kasar dirancang untuk menahan kerasnya penanganan dunia nyata, memberikan kinerja yang andal meskipun ada benjolan, tetes, dan penggunaan di bawah meja kerja.

Di lingkungan manakah logger data ini beroperasi?
Data logger ini beroperasi di lingkungan dalam ruangan.

Pengukuran apa yang dilakukan oleh data logger ini?
Data logger UX120-018 mendukung pengukuran berikut: Arus AC, Tegangan AC, Amps (A), Kilowatt Hours (kWh), Faktor Daya (PF), Volt-Amps (VA), Volts (V), Watt Hours (Wh ) dan Watts (W)


Feature

  • Akurasi pengukuran 0,5% memungkinkan data energi pasang steker yang lebih andal
  • "Meter Mode" memberikan tampilan seketika variabel beban plug real-time
  • Menyediakan data beban waktu dan total beban untuk analisis energi terperinci
  • Memori besar memungkinkan interval penebangan lebih cepat untuk profil beban plug yang lebih komprehensif
  • Back-up baterai memastikan data log tetap utuh jika terjadi pemadaman listrik atau kegagalan beban
  • Layar LCD berfitur lengkap menyediakan diagnostik visual untuk penyebaran yang mudah
  • Kompatibel dengan software HOBOware dan HOBOware Pro untuk setup logger, grafik dan analisis

Spesification

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Note: The UX120-018 logger is intended for use on 15 AMP circuits (NEMA 5-15P) with a working voltage of 120V AC ±10% at 50/60Hz and a max power of 1800W.

  • Indoor use only
  • Insulation category 2

RMS Voltage Accuracy: 0.5% up to 14 Amp continuous; up to 1.0% over 14 Amp when equipment being monitored is at 100% duty cycle
RMS Current Accuracy: 0.5% up to 14 Amp continuous; up to 1.0% over 14 Amp when equipment being monitored is at 100% duty cycle
Active Power Accuracy: 0.5% up to 14 Amp continuous; up to 1.0% over 14 Amp when equipment being monitored is at 100% duty cycle
Active Energy Accuracy: 0.5% up to 14 Amp continuous; up to 1.0% over 14 Amp when equipment being monitored is at 100% duty cycle
Power Factor Accuracy: ±0.02
Drift: Up to 0.5% typical within 1 year
Resolution:
Volts, rms 10mV
Amps, rms 0.1mA
Active Power 10mW down to 1 watt loads @ 120VAC
Apparent Power 10mVA
Power Factor 0.01 PF
Operating Environment: Logging: 5° to 40°C (41° to 104°F); 0 to 95% RH (non-condensing), up to 2,000 m (6,562 ft) altitude
Operating Modes: Meter or logging when launched with HOBOware
Logging Rate: 1 second to 18 hours, 12 minutes, 15 seconds
Statistics Sampling Rate: 60 Hz or 16.67 mS single-cycle
Memory Modes: Wrap when full or stop when full
Start Modes: Immediate, push button, date & time, or next interval
Stop Modes: When memory full, push button, or date & time
Restart Mode: Push button
Time Accuracy: ±1 minute per month at 25°C (77°F), see Plot A
Power Source: Line-powered with 0.92 m (3 ft) AC power cord or two AAA 1.5 V alkaline batteries, user replaceable
Battery Life: 2 years with line power; 6 months battery only (no line power) with logging rate of 1 minute or greater operating at 25°C (77°F)
Memory: 4 MB (1.4 million measurements, maximum)
Download Type: USB 2.0 interface
Full Memory Download Time: Approximately 1.5 minutes
LCD: LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 13.97 x 7.62 x 4.75 cm (5.5 x 3 x 1.87 in.)
Weight: 230.8 g (8.14 oz)
Ratings: IP50;
UL LogoUL Listed; UL Listed to Canadian safety standards
Calibration: This device has been calibrated using equipment that has been tested in accordance with ANSI C12.20 0.5%.
  Time Accuracy