Measurement and Verification (power monitoring) System - 3 Phase - KIT-MV-3P

Measurement and Verification (power monitoring) System - 3 Phase - KIT-MV-3P



Order Catalog

Description

Produk ini berasal dari Amerika Serikat. Untuk melihat spesifikasi lengkap produk ini, jika tersedia lihat manual book yang terdapat pada tab dokumentasi.


Spesification

H21-002 - HOBO Micro Station Data Logger

  • Operating Range: -20° to 50°C (-4° to 122°F) with alkaline batteries, -40° to 70°C (-40° to 158°F) with lithium batteries
  • Sensor Inputs: Up to four smart sensors (including multiple-parameter sensors)
  • Communication: 3.5 mm serial port
  • Dimensions: 8.9 cm H x 11.4 cm D x 5.4 cm W (3.5 x 4.5 x 2.125 inches)
  • Weight: 0.36 kg (0.8 lb)
  • Memory: 512K nonvolatile flash data storage
  • Memory Modes: Stop when full, wrap around when full
  • Operational Indicators: Seven lights provide logging and sensor network status
  • Logging Interval: 1 second to 18 hours, user-specified interval
  • Battery Life: 1 year typical use (up to 4 sensors with 1 minute or longer logging
    interval)
  • Battery Type: Four standard AA alkaline batteries included (for operating conditions -20° to 50°C [-4° to 122°F]); optional AA lithium batteries available for operating conditions of -40° to 70°C (-40° to 158°F)
  • Time Accuracy: 0 to 2 seconds for the first data point and ±5 seconds per week at
    25°C (77°F)
  • Data Type: Supports measurement averaging based on availability of
    supporting data from sensor
  • Logger Start Modes: Immediate, push-button, or delayed start options
  • Data Communication: Current reading while logging, offload while logging, or offload
    when stopped
  • Environmental Rating: Weatherproof, with GoreTM Vent for deployment in harsh weather conditions
  • Mounting: Mount vertically on flat surface 18 cm (3.5 inches) or wider; optional mast mounting kit for use on 4.1 cm (1 5/8 inches) diameter masts
  • Enclosure Access: Cover secured by four screws
  • Sensor Network Cable Length: 100 m (328 ft) maximum

S-UCC-M001 - Electronic Switch Pulse Input Adapter - 1 meter

  • Maximum Input Frequency: 120 Hz (120 pulses per second)
  • Measurement Range: 0 – 65,533 pulses per logging interval
  • Resolution: 1 pulse
  • Lockout time: 45 µs ± 10%
  • Recommended Input Type: Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)
  • Preferred Switch State: Active low input Normally open
  • Edge Detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)
  • Minimum Pulse Width: 1 ms
  • Input/Output Impedance: 100 KΩ
  • Open Circuit Input Voltage: 3.3 V
  • Maximum Input Voltage: 3.6 V
  • User Connection: 24 AWG wires, 2 leads: white(+), black(-)
  • Operating Temperature Range: -40° to 75°C (-40° to 167°F)
  • Overall Cable Length: 1 m (3.3 ft.)
  • Housing: Weatherproof PVC housing protects input adapter electronics
  • Housing Dimensions: 14 x 0.95 cm (5.5 x 0.375 in.)
  • Weight: 310 g (11 oz.)
  • Bits per Sample 16
  • Number of Data Channels: 1
  • Measurement Averaging Option: No (reports the number of pulses over the logging interval)

T-MAG-SCT-050 - 0 - 50 AMP Split-core AC Current Transformer -0.75” Opening

  • Measurement ranges: 0-50 Amps AC
  • Accuracy: ±1% (from 10% to 130% of rated current)
  • Voltage rating: 600VAC
  • Phase angle:
  • Output signal to FlexSmart TRMS Module: 0.333V at rated current
  • Number of data channels: 1
  • Quality construction:
  • UL recognized
  • 0.75” Opening
  • Epoxy encapsulated housing
  • Leads – 8-ft twisted pair, 22 AWGG
  • Snap closing/opening
  • Internal precision burden resistor

T-MAG-SCT-200 - 0 - 200 AMP Split-core AC Current Transformer - 1.25” Opening

  • Measurement ranges: 0-200 Amps AC
  • Accuracy: ±1% (from 10% to 130% of rated current)
  • Voltage rating: 600VAC
  • Phase angle:
  • Output signal to FlexSmart TRMS Module: 0.333V at rated current
  • Number of data channels: 1
  • Quality construction:
  • UL recognized
  • 1.25” Opening
  • Epoxy encapsulated housing
  • Leads – 8-ft twisted pair, 22 AWGG
  • Snap closing/opening
  • Internal precision burden resistor

T-WNB-3D-240 - WattNode 208/240 VAC 3-phase Delta kWh Transducer

  • Delta or Wye Configuration ranges: 208, 480 Volts AC
    • 1 Phase 2 Wire 208V (No neutral)
    • 1 Phase 2 Wire 240V (No neutral)
    • 1 Phase 3 Wire 120V/240V
    • 3 Phase 3 Wire 208V (No neutral)
    • 3 Phase 4 Wire 120V/208V
  • Rating: FCC Class A
  • Operating: voltage range: ±20% of nominal
  • Frequency: 60 Hz
  • CT input: 0-0.5 VAC operating, 3 VAC maximum
  • Accuracy: ±0.45% of reading + 0.05% FS through 25th harmonic (dependent on CT used and line variation accuracy could be 1.5% to 4% of reading)
  • Enclosure: high impact, UL rated ABS plastic
  • Connectors: UL, CSA recognized, detachable screw terminals (14 AWG), 600V
  • Operating temp range: -30 to 60°C (-22 to 140°F)
  • Operating humidity range: 0 to 90% RH, non-condensing
  • Dimensions: 8.5 cm x 14.3 cm x 3.8 cm (3.3 in. x 5.6 in. x 1.5 in.)
  • Weight: 295 g (10.4 oz.)
  • Number of data channels: 2