Extended Memory State Data Logger - HOBO - UX90-001M

Extended Memory State Data Logger - HOBO - UX90-001M



Order

Description

Status HOBO / Pulse / Event / data logger mencatat perubahan keadaan, pulsa elektronik dan penutupan kontak mekanis atau elektrik dari perangkat penginderaan jauh. Logger ini sangat ideal untuk memantau konsumsi energi, operasi peralatan mekanis, dan aliran air dan gas. The HOBO UX90-001 State Logger tersedia dalam model memori 128 KB standar (UX90-001) yang mampu melakukan pengukuran sebanyak 84.650 dan versi memori 512KB yang diperluas (UX90-001M) yang mampu menghasilkan lebih dari 346.795 pengukuran.

Di lingkungan manakah logger data ini beroperasi?
Data logger ini beroperasi di lingkungan dalam ruangan.

Pengukuran apa yang dilakukan oleh data logger ini?
Data logger UX90-001M mendukung pengukuran berikut: Event, Kilowatt Hours (kWh), Motor On / Off, Input Pulse, Runtime, Open State / Closed dan Water Flow


Feature

  • Satu logger dengan 4 mode perekaman
  • Saklar buluh internal dapat digunakan untuk menentukan kapan pintu atau jendela terbuka atau tertutup
  • Kompatibel dengan berbagai macam sensor eksternal
  • Kapal dengan kabel input 2,5 mm
  • Kompatibel dengan software HOBOware dan HOBOware Pro untuk setup logger, grafik dan analisis

Spesification

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Internal Sensor


Maximum state, event, runtime frequency: 1 Hz
Preferred switch state: No magnet present (normally open)
 

External Input


External contact input: Electronic solid state switch closure or logic driven voltage output
Range: 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)
Maximum pulse frequency: 50 Hz
Maximum state, event, runtime frequency: 1 Hz
Pulse, event lockout time: 0 to 1 second in 100 ms steps
Solid state switch closure: Input Low: < 10 K?; Input High: > 500 K?
Internal weak pull-up: 100 K?
Input impedance: Solid state switch closure: 100 K? pull up
 

 

Logger


Resolution: Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
UX90-001- - Time and Accuracy Specification ChartTime accuracy: ±1 minute per month at 25°C (77°F) (see Plot A)
Battery life: 1 year, typical with logging intervals greater than 1 minute and normally open contacts

Memory
UX90-001: 128 KB (84,650 measurements, maximum)
UX90-001M: 512 KB (346,795 measurements, maximum)

Download type: USB 2.0 interface
Download time: 10 seconds for 128 KB; 30 seconds for 512 KB

Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)
Weight: 23 g (0.81 oz)
Environmental rating: IP50

Description: ce - The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)